Telecom Training

Telecom-Overview

  1. Introduction
  2. Wire Vs Wireless network
  3. Cellular Generations
  4. First Generation
    1. Multiple standards based on 1G
    2. Disadvantages
  5. Second Generation
    1. Disadvantages
  6. GPRS & EDGE
    1. Features
  7. Third Generation
    1. Features
  8. Fourth Generation
    1. Features
  9. Comparisons of Generation

Types of Sites

  1. Priority 1 sites
  2. Reliance Priority 1 sites
  3. IP COLO sites

Tower and Types

  1. Introduction
  2. Types of Tower
  3. Ground Base
    1. GBT
    2. GMB
    3. NBT
  4. Roof Base
    1. RTT
    2. RTP
    3. RTD
  5. Wall Mount
  6. COW
  7. Grounding
    1. IGB
    2. OGB
    3. TGB

Safety (TBT Checklist)

  1. Safety Equipments
  2. Safety Belt
  3. Safety Helmet
  4. Safety Shoes
  5. Safety Hand Gloves
  6. Safety Concerns

Surveys and Types

  1. Introduction
  2. Basic Tools
  3. Requirements
  4. Types of Surveys
  5. RF Survey
    1. Tools for RF Survey
  6. RFE1 Survey
    1. Tools for RFE1 Survey
  7. EMF Survey
    1. Tools for EMF Survey
  8. LOS Survey
    1. Tools LOS Survey

TribandI & C Equipments on Tower

  1. Antenna Introduction
  2. GSM & CDMA Antenna
  3. GSM Antenna Height Depends Upon Factors
  4. Types of Surveys
  5. Antenna Scenerio
    1. Single Band Scenerio
    2. Multiband Band Scenerio
    3. Penta Band Scenerio
  6. GSM Antenna
    1. ACE Antenna
    2. Rosenberger Antenna
  7. Microwave Antenna
  8. Microware Link
    1. SDH
    2. PDH
  9. RRH Introduction
  10. Types of RRH
    1. V1 (window)
    2. V2 (without window)
    3. V3 (without window)
  11. RET
  12. Types Of RET
    1. Motor RET
    2. Inbuilt RET
  13. GPS Introduction

Tilt and Types

  1. RFE1 Tilt & I&C Tilt
  2. Types of Tilt in RFE1
    1. Side Tilt
    2. Up-Down Tilt
  3. Types of Tilt in I&C
    1. Mechanical Tilting
    2. Electrical Tilting

Triband I&C Equipments on Platform or Ground

  1. Shelter Room
  2. Shelter Room Components
  3. ODC Rack and Components
    1. DCDB
    2. DU
    3. Roxtec
    4. GPS Arrester
    5. Router
    6. Batteries
  4. Tools for Installation

ATP 11A (Quality Check)

  1. Acceptance Test of I&C activity

Types of Cabling

  1. Power Cable
  2. CPRI Cable
  3. RET Cable
  4. Jumper Cable
  5. Grounding Cable
  6. Backhaul Cable
  7. GPS Cable

Sector Addition Installation Process

  • Introduction of Sector Addition
  • Acceptance Test

    • ATP 11B (Performance Check)

  • Introduction of Triband Atp 11B

    • Different types of Signage Board

    1. Different types of Signage Board
      1. Caution
      2. Warning
      3. Danger

    EMF Process

    1. Introduction of Electromagnetic Frequency
    2. Types of EMF
      1. Calculation Process
      2. Broadband Process
      3. Roxtec
      4. Narrowband Process

    Drive Test Activity

    1. Introduction of DT
    2. Types of DT
      1. SCFT
      2. SSCVT
      3. DT Process Steps

    Types of Alarms at Sites

  • ECP Optical Alarm
  • ALD Communication Fail
  • RET Accuator Jam
  • VSWR Alarm
  • Tx-Rx Alarm
  • Sector Down

    • Zero PP Guidelines

  • Safety Guidelines
  • Antenna Punch Points
  • RRH Punch Points
  • GPS Punch Points
  • DU Punch Points
  • ROXTEC Punch Points
  • MCB Punch Points
  • ODC/GBM/Shelter Punch Points

    • Microwave Installation

  • Mounting the ODU Bracket
  • Mounting to the Antenna
  • iPASOLINKiX Cables
  • MDU Interfaces
  • Cables Connections
  • Microwave ATP

    • Site Visit

  • Site Visit on live site

    • Recent Posts